You can patch small holes in window screens with adhesive. The new screen patch should leave about a half-inch border around the hole. Screen patches are often sold individually or as rolls. You can apply two coats to the damaged screen. The first coat should dry before applying the second one. If the hole is large, you will need to replace the entire screen.

 

First, remove the old screen from the frame. The screen is held in place by a plastic cord called the spline. It runs through a channel on the metal frame. You can remove the spline by using a flat-head screwdriver or a nail punch. Save the spline to use to measure the new screen.

 

Next, cut a patch of the right size. The patch should be about a half-inch bigger than the hole. You should also use a patch with teeth that are bent at right angles. Place the patch over the hole so that it penetrates the screen. Once the patch is in place, set the new screen over the old one. You can click here for details on window screen repair.

 

If you cannot find the original screen, it's best to call a window screen repair company. They will have pre-measured rolls of screening material that can be purchased at home centers. If your window is tall, you should also buy a center support strip that will prevent the screen from bowing inward. Most stores carry aluminum frame stock, which can be easily cut to fit.

 

Window screen repair is a simple process that will save you money. The repair cost will depend on the size and quality of the damaged screen. Screen repair is more affordable than screen replacement. The process of rescreening your windows may only take one or two hours. However, this task isn't something you want to do every week. Cleaning and storing your window screens during the winter months will extend the life of the screen.

 

The replacement material for your window should be a bit larger than the frame. This excess material is then cut away. The new screen should overlap the old screen by a couple of inches. When installing the new window screen, you should use the old spline as a guide. A putty knife can also help with this.

 

Small tears or holes in window screens can be patched with adhesive, screen tape, or mesh kits. You should first cut off the rough edges of the gap and make sure that you have extra tape around the edges to give the patch something to stick to. After that, place the patch over the hole and heat it with a blow dryer to ensure the screen sticks properly. Find more guidance on window screen repair colorado springs.

 

Window screens are made of various materials, including fiberglass, copper, and stainless steel. Aluminum is a durable material that will not rust and is ideal for outdoor windows. Stainless steel and copper are excellent materials for indoor and outdoor screens because they allow good air flow and visibility. Check out this link: https://en.wikipedia.org/wiki/Window_screen for a more and better understanding of this topic.